ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃû
º º
º T H E S P O O K F I L E S º
º º
º VOLUME ONE º
º º
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃü
Let's face it, folks, the world is going to hell in a hand basket and
we're all being fucked over by the fascist regimes that we live in.
The government, school, work, whatever...they're all out to get us
and make our life miserable. They expect us to be robots, soldiers.
They want us to follow orders, obey their commands, do what we're
told. Bend over and get fucked and LIKE IT!
We're being savaged by a twisted society that is full of assholes who
think they know what's best for us. Well I say FUCK THEM!
I decide what I want out of life! I decide what's best for me! Not
some lame-fuck loser in a suit with a bad haircut and a phoney smile.
This handbook is for those of you who want to prepare for the day
when you must strike back against the assassins of our freedoms and
civil rights. If they think they're going to have an easy time
fucking us over, I got news for them.
As a member of the grassy knoll marksman's society (only three
members) and as a rogue agent of the secret government and a 20th
level archmage of the Illuminati, I know whereof I speak.
This book is for you. It was written by those who believe in the
importance of knowing how to fight tyranny.
In this manual, you will know many useful things related to being a
Secret Agent of Anarchy.
Copy it freely, but be careful of who sees it. They're watching.
-The Spook-
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
This file is separated into sections: Funding techniques, Anarchy,
Phreaking, Drugs. Since everyone has a different way of printing out
files, I have added ANSI bars to seperate the articles. You should
place a hard page break where the double bars are.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÿ
³ F U N D I N G T E C H N I Q U E S ³
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
Before you begin your career, you're going to need money. Here are
some tips on how to get some if you don't already have it.
DISCLAIMER: I'd like to remind everyone that this in no way suggests
that I use these techniques. This is just information I've obtained
and am passing on. I'm already rich from my covert activities, so
these funding techniques are for emergencies only.
Important note: If you get busted, the penalty is stiff so if you
want to enter the realm of fraud, do it knowing you're on your own.
-The Spook-
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
S O D A M A C H I N E R I P - O F F
Here is a way to rip off the coke machines you see out side of stores
and other places!
Okay, first--on all vending machines there are always those round
almost unpickable locks when no one is looking take a piece of air
hardening clay (make sure it is only air hardening!) and press it
into the lock real good! Then remove the clay carefully and put it
somewhere to dry! Make sure the clay is TOTALLY dry then go back in a
day or so and you will have a key to fit that lock put the key in and
push and turn and presto the machine will open allowing you to take
all the money!
A good machine will get you between 2100 and 300 dollars depending
when it was last checked by the company. Best of all if someone sees
you just put the key on the ground and step on it and its powder! And
then you cant be busted because the evidence is blown away! So that's
it and if anyone has any good schemes, write a file on them and add
to the Mystery Note collection.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
C O I N M A C H I N E F R A U D I
Here's the equipment that you need access to in a fairly secluded
area:
1) A copy machine that is of fairly good quality.
2) A change machine that changes 1's and 5's to quarters.
3) A 1 or 5 dollar bill
4) A table paper cutter that cuts paper exactly straight.
5) A lot of courage!
OK what you do is walk into the place and copy the face side of your
dollar. Put the dollar bill face down and in the exact middle of the
machine's window. The first time you do this, only make one copy,
because it might not work correctly. When you get your copied dollar
bill from the machine, check the toner and make sure that it is just
like the original. If its too dark or too light, then adjust the
copy machine accordingly. When you get a perfectly contrasted
dollar, take it over to the paper cutter and put the original dollar
over the paper dollar and slice the dollar out of the big piece of
paper. Now for the fun part.
Make sure that there are no hidden cameras in the room watching you,
or you'll be caught for sure!
Walk up to the change machine and casually slide the dollar bill into
the machine and push the carriage or whatever in. If the dollar
comes back out then take it, rip it in half and put it in your
pocket. Throw it away someplace else. But if the jingling joy of
quarters comes, you will be in the money! But when you do it, do it
in mass amounts, because if you do one a day, they'll probably post a
guard in there or something.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
C O I N M A C H I N E F R A U D I I
Have you ever seen one of those really big changer machines in
airports, laundromats or arcades that dispense change when you put in
your 1 or 5 dollar bill? Well then, here is an article for you.
1) Find the type of change machine that you slide in your bill
length wise, not the type where you put the bill in a tray and then
slide the tray in!
2) After finding the right machine, get a $1 or $5 bill. Start
crumpling it up into a ball. Then smooth out the bill, now it should
have a very wrinkly surface.
3) Now the hard part. You must tear a notch in the bill on the left
side about 1/2 inch below the little 1 dollar symbol (See Figure).
4) If you have done all of this right then take the bill and go out
to the machine. Put the bill in the machine and wait. What should
happen is: when you put your bill in the machine it thinks
everything is fine. When it gets to the part of the bill with the
notch cut out, the machine will reject the bill and (if you have done
it right) give you the change at the same time!!! So, you end up
getting your bill back, plus the change!! It might take a little
practice, but once you get the hang of it, you can get a lot of
money!
!--------------------------------!
! !
! (1) /-------\ (1) !
! ! ! !
! ! Pic. ! !
! (1) /\ \-------/ (1) !
! !! !
!-----/ \-----------------------!
\-------Make notch here. About 1/2 " down
from (1)
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
C R E D I T C A R D F R A U D
[1] Finding a Credit Card Number.
The easiest way to get Credit Card Numbers is to go to a trash bin of
a place that uses Credit Card Numbers. If the place doesn't bother
burning the papers, you can usually find hundreds and hundreds of
Numbers on a good day. If you work in a Gas station, you can get
millions of the things a day.
If you want to nail some guy you know, and you can break into his
car. Most people will save their Credit Card Numbers and its
registration right in the glove compartment for records about their
gas. Just break into the car, grab one of those papers, and voila!
A few warnings, many banks now have cameras set up to watch the
trash bins. You can either spray the camera with spray paint or cover
it with a sheet, but then just quickly grab some and run. You never
know if the cop will be watching that camera. Remember, the best way
to go Credit Card Number looking is to get with a friend who is in a
car, watching for other people.. Also, it is best to go late at
night, the later the better, the guards are usually so stupid that
they won't even bother watching. Most people that I know don't even
bother with banks trash-bins though. The only time it's good to do
that is if you're also trashing for hacking info. If you just need
some Credit Card Numbers then just find some good place that uses
Credit Card's and trash it..
There are other ways such as credit bureau's that you can get credit
card numbers as well as telephone numbers, and lots of other fun
information. However, as a whole, stay away from credit bureau's like
CBI and especially TRW. TRW has gotten extremely dangerous. If you
enter a false password, the the call is immediately traced. If you
decide to use credit bureaus that fine, but as whole, there is no
real need to. just go trashing for new Credit Card numbers, and you
real won't have anything to worry about. If you trash a place in
which the customers are rich, you usually won't have to worry about
the card being valid.
A note--> Visa and Mastercard have changed over to a new type of
carbon. In other words when you tear the copies , the number on the
carbons gets split in half. (Thanks Bomb Jack). There are still ways
around this. Have a friend of yours that works in one of these
places just write down the numbers. A friend of mine works in a
place where they take all the Credit Card carbons, chuck them in one
barrel. he then takes them out to the trash.. (or does he??)
Well, that just about covers methods of how to get Credit Card
Numbers. if you would like to try your luck with credit bureau's
then read the file, TRW information or other files which have to do
with credit bureaus. I am not going to go into detail about them.
[2] Explanation of Credit Card Numbers
You've got this garbage, but you don't know exactly what kind of card
it is or anything else. Well, to find out what kind of card it is
here is a brief summary of the number of digits and the information
you need to know to use the Credit Card's properly.
Mastercard
Digits-16
Expiration date-look for
something like 4/85
Usually has an Interbank number
that is 4 digits long
Name of person
Visa
Digits-13
Expiration date - same form as
above
Name of person
Visa Gold
Same as normal Visa but have 16
digits
American Express
Digits-15
Expiration date - these
have beginning and ending
expiration dates that you have
to know like- 10/83-7/85
Name of person
American Express Gold
Digits-20
Expiration date - same as normal
Name
Note-These cards have a 5000
dollars in them at least so
look for them
American Express Platinum
Digits-?
Expiration date - same ???
Has a 1,000,000 dollar limit i
think.
Many times people will post numbers that will "check" the credit card
for the amount of money that you type in. However, there are many
problems with this. The major one is that when you call the number
and type in that amount, it is subtracted from the card. In other
words, if you have a card that has 500 $ in it and you "check" it for
300 dollars and then try to use the card, there will only be 200
dollars in the account so it won't work. Now another idea that has
been suggested is to have just a small amount entered, just to check
to see if the card is valid. This will work, but make sure you enter
something like 50$, since validation of cards is not done usually on
orders that are under 50 dollars.
Here are some of the "voice validation numbers that I am talking
about. 1-800-842-1250.. Another one is 1-800-228-1111, when you get a
carrier, do #+5317007000220959+card number + the expiration date +
the amount of the purchase. The recording will tell you if it is
valid or not. However, there shouldn't even be a need to check on
them. As long as you get them from a somewhat rich place, and don't
use it for anything extravagant (A black Porsche, for instance), you
shouldn't have anything to worry about.
[3] Uses
Ok, the part everybody's been waiting for. You have that stupid
number in your hand but how do you use it? There are many ways to
use the numbers and I'll go through as many as I can right here.
An important thing to remember is - Never use a Credit Card Number
more that once. You can use the same Credit Card at the same time,
but don't use a Credit Card Number one month and then try to use it
again the next. The best time to use a Credit Card Numbers is at the
end of the month when the bills arrive. That means you have an
entire month to use the card.
OK, now for the uses. There are two kinds of uses that you can u use
a Credit Card for. Number one is "for yourself". You can use the
Credit Card to add to your computer, your home, or whatever else you
want to add to. The other type of use is revenge. You can use the
Credit Card either to get back at the person who owns the Credit
Card, or get back at other people which will be explained further
into the tutorial.
Mail order catalogs - Places that say that they will accept Credit
Card Number orders are great places to order from. However, a quick
inside tutorial is needed here. She is going to ask you for your
phone number to check you out. There are two ways to get around this.
Number 1 is to call from a pay phone in your town and wait until she
calls back. Wait about 15 minutes, if she doesn't call back by then,
she's not calling back. A note.. 50% of the time the lady will give
the number to shipping to validate. The guy will then call you the
next day. If you want to get around this tell the lady that you are
calling from out of state and won't be at this number tomorrow.
She'll probably fall for it. An extremely good way of using a pay
phone is to get the phone number of the Credit Card owner forwarded to
the phone booth. This can be a little difficult for the beginner
Credit Carder, though.
The second way is to find a good loop in your state and call the
other end and give her the first end. This is the best way there is.
Remember though, if you tell her that you live in Connecticut, but the
loop you give her is in Pennsylvania, and she notices, you will be in
trouble. Continuing on this thought, you need an address to which to
send your new found goods.
There are many different places to have the goods shipped to.
Remember, don't send it to your house!! Not very intelligent.
Because you're not going to send it to your house you must use a drop
zone. A drop zone is a house that's near one of your friend's house or
your house. The perfect drop zone has nobody living in it, and is
currently waiting for a buyer. Another perfect drop zone is a
neighbor who's going away to some place like England for a 3 month
vacation. The only problem with that is that the person might have
their mail held at the post office. However, U.P.S., which packages
are sent through, often doesn't listen, and just sends the sucker
anyway.
If you want to Credit Card and you can't find a good drop zone, don't
send it to a friend's house, just send it to an old ladies home,
who's too lazy to go out and get her mail. Just swing by the house
every day and check and see if the package arrived.
Okay, so you have your drop zone, you have a phone number to give the
"nice" lady, so now's the big moment. Give the place a call. Be
sure to sound as cool and collected as possible. If you hesitate a
lot and worry, the lady will become suspicious. Sound a little bit
annoyed at the lady, like you have better things to do, but be
polite. Then just order what you want, she will ask for the name of
the person, his Credit Card Number, his expiration date, and all the
other stuff I listed above. Don't be stupid and hesitate on the guys
name. It does not assure the lady that you are really John
Fredrickson or whoever. Remember, be cautious with what you buy. It is
possible to get hard drives, but they usually will check you out
more. If you want to get a joystick, but say, "what the hell, I might
as well go for a hard drive too..", buy the hard drive with one card
Number, and the joystick with another. That way, you'll at least get
the joystick.
Computer Shows - A lot of Computer shows have telephone lines set up
so they can demonstrate their modems. What you do then is to walk
around until you find one of these places and say.
"Excuse me, a friend of mine wants me to get me a 9600 baud modem and
a joysticks (more about the joystick later), but he can't get down to
the show. Can he call you and give you his credit card number. You
can then call him back and check him out"
It usually takes a while to find a sucker that will do this but when
you do. Have one of your friends call the number while you stand and
talk with the guy. Chat it up with this guy. When he asks for the
number, give him the number of the pay phone. Your friend will then
be called back upon which he will reply "Yep, I ordered it." Voila!
You now have a 9600 baud modem and two joysticks.
Important things to consider about this last method, if you do get
caught. Now I will explain why to get two joysticks, it doesn't have
to be two joysticks, it can be two microchips, it doesn't matter. If
you do get caught (it's never happened to anyone I know, but this is
a pre-caution), tell the cops that you were doing this since this guy
told you that he would give each of you a joystick with his credit
card number if you would go in. Say that he had no cash and couldn't
get into the show, and he left his credit card at home or something.
Remember, creativity in this situation may save the cat, not kill it.
Then, lead the cops outside and show them where you were supposed to
meet this guy and give it to him. He, obviously, won't be there so
you say, "Shit, he must have seen me with you and ran! I didn't know
I was doing anything wrong, he just wanted to get this modem really
badly but didn't have his credit card with him or any cash" Act
really stupid, because this really is a lame excuse.
If you find a really stupid looking salesmen, especially the foreign
ones (they wouldn't believe that anything like this would ever
happen) this method will work extremely well.
Destroying a person's credit - This is by far the easiest revenge
method of credit carding. Just call up one of those "voice
validation" or "credit card validation" numbers and type in the
Credit Card Number of a person that you hate, and then keep typing in
high amounts of money until all the money in his account has
disappeared. Then when he goes to buy something, all the money on his
Credit Card will have suddenly disappeared.
[4] Advanced Credit Carding
Ok, you've come this far. "What's next?" you ask. Well, the more
advanced thing to do and the best thing to do if you are successful
is to get a real plastic Credit card. If you steal one, go wild
with it the first day, since the person will probably call in and
report the card missing after a while. Make sure you have a copy of
the person's signature, a fake id, under his name, or anything else
useful. If your signature looks totally different than the signature
of the person, you will get nailed. Things to remember: Don't
get caught!! Act older than you probably are. The older you are, the
better chance of success you will have. Again, act casual about it.
Biting your fingernails is not a good sign of a good customer.
Another thing to do is to stay away from big places. I do know of
people, (not personally, A friend of mine works there and at least 4
people have been caught for doing this). Visit small stores and
small places. Sometimes you can take the stuff back and return it for
money. Don't use the Credit Cards at banks for cash unless you want
to get caught.
Another great advanced method is to get your own fake Credit Card
card. These are the best. Have the card shipped to a drop zone or
house, and once you get it, go wild. Use it at all the places which
don't check out your credit rating (there are a few stupid places
that don't).
You can also get fake Mervyn's cards, Sears card, or any other type
of money card if you work at it. Just be careful. Merchants are
supposed to detain illegal Credit Carders by peaceful methods. But if
a person is using a fake credit card, they're not going just say,
"Please come with me, unless you don't want to." If you're in a
small store, make a run for it. If you're in a big store, and the
clerk informs you that the card is invalid (If he thinks the
signature isn't right, he won't tell you, but if he watch to see if
he calls security) then just act huffy, grab your fake card angrily,
and walk out of the store in a huff.
ADDITIONAL CARDING ADVICE
Try not to fuck with well known computer companies. They're the ones
who have been around the block. Go for some unknown computer company
that might have a mailer at your local computer swapmeet. Secondly,
make your order as realistic as hell when you call. Ask about the
quality of what you are ordering, the value, when your package will
come, total price...tax, everything that comes in mind. Have your
info ready off the bat, if you stall, they won't take you seriously
and you'll never get your order. Like when they ask for your name,
don't go "uuhh...uhh...oh, Mark Lamedick" you have to know
everything straight and simple. Then tell Shipping that you are
currently moving right now, and you most likely wont be home in the
afternoons - mornings - early evenings. Last but not least, you's
better have your ass a good ass drop off point.
What works best is when someone is on vacation or an abandoned house.
Write a note on the door that says something like: "Dear UPS, I'm
currently moving right now, and I probably won't be home in the
afternoons for quite some time. I will be home in the evenings
probably after 7 pm. Could you please leave the package on the
doorstep, and I will pick it up when I come home, or could you stop
by after 7pm (They wont cause they never deliver after 6) Thank you
very much. Jane Cockhound... Okay...now go that evening...hound the
place every fucking day during the 7 - 10 working days that the
package is supposed to come. Get the package, and do with it what
you want. Only order in large bulk around Christmas time (like
ordering four 200 dollar Walkmans) Any other times, just make a
bunch of small orders.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
A U T O M A T I C T E L L E R F R A U D
Automatic Teller Fraud is not a particularly easy scam to pull off,
as it requires either advanced hacking techniques (TRW or banks) or
serious balls (trashing a private residence or outright breaking and
entering), but it can be well worth your while to the tune of $500
(five hundred) a day.
Laws that will be broken: Credit Fraud, Wire Fraud, Bank Fraud, Mail
Fraud, Theft Over $200, Forgery, and possibly a few others in the
course of setting the scheme up.
The first step is to target your victim. The type person you are
looking for is rich. Very rich.
Now, don't go trying to hit on J.P. Getty or Johnny Carson or someone
who carries a high name recognition. This will just get you into
trouble as everyone notices a famous person's name floating across
their desk.
Instead look for someone who owns a chain of hog feed stores or
something discreet like that. For example, target a gentleman who is
quite active in the silver market, owning several mines in South
Africa. Not wanting this to be widely known, he will avoid publicity.
Next step, take out a P.O. box in this person's name.
Now comes the fun part, requiring some recon on your part. You need
to know some fairly serious details about this person's bank
dealings.
1) Find out what bank he deals with mainly. This isn't too
difficult as a quick run through his office trash will usually let
you find deposit carbons, withdrawal receipts, or *anything* that has
the bank name on it.
2) Find out the account number(s) that he has at the bank. This can
usually be found on the above-mentioned receipts. If not, you can
get them in TRW (easier said than done) or you can con them out of a
hassled bank teller over the phone (Use your imagination. Talk
slowly and understandingly and give plausible excuses ["I work for
his car dealership, we need to do a transfer into his account"].)
2a) [optional] If you can, find out if he has an ATM (Automatic
Teller) card. You don't need to know numbers or anything, just if a
card exists. This can also be ascertained over the phone if you
cajole properly.
3) Armed with this information, go into action.
a) Obtain some nice (ivory quality) stationary. It doesn't have to
be engraved or anything, but a $5 or $10 investment to put a
letterhead with his initials or something on it couldn't hurt. But
the most important thing is that it look good.
b) Type a nice letter to the bank notifying them of your address
change. Some banks have forms you have to fill out for that sort of
thing, so you need to check with the bank first (anonymously, of
course). You will have to have a good copy of his signature on hand
to sign all forms and letters (again, trash his office).
c) Call the bank to verify the new address.
d) IMMEDIATELY upon verifying the change of address, send a second
letter. If he already has an ATM card, request a second card with
the business name engraved in it be sent for company use. If he
doesn't have an ATM card, the letter should request one for account
number xxxxxx. Ask for two cards, one with the wife's name, to add
authenticity.
e) Go to the bank and ask for a list of all ATM's on the
bank's network. Often the state has laws requiring *all* machines
take *all* cards, so you'll probably be in good shape.
f) Await the arrival of your new card. The PIN (personal
identification number) is included when they send out a card. After
picking up the card, forget that you ever even *knew* where the p.o.
box was, and make sure you didn't leave fingerprints.
g) Begin making the maximum daily withdrawal on the card (in most
cases $500/day), using a different machine each time. Since many of
these machines have cameras on them, wear a hat and jacket, or a ski
mask to be really paranoid. To cut the number of trips you have to
make in half, be at an ATM a few minutes before midnight. Make one
$500 withdrawal right before midnight, and another one right after.
This cuts down on the number of trips, but police or bank officials
may spot the pattern and start watching machines around midnight.
Use your own judgement.
Conclusion: Before using the card, make sure that all fingerprints
are wiped from it. Usually the first hint you will have that they
have caught on to your scam is that the machine will keep the card.
Also, avoid using machines in your own town unless it is a big city
(Chicago, Milwaukee, Dallas, etc...).
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
F A K E I D S
The object of this article is to teach one to change his or her
current driver's license to make one 21, without taking apart the
drivers license itself. This will be taught to you in a quick,
inexpensive, easy to understand process. The materials used are
laminated sheets (easily obtainable from a school supply store for
around a dollar to two dollars for a number of sheets), pair of good
scissors, and a copy machine.
The first step in the process calls for the copy machine (a copy
machine at the supermarket works good). Make two copies of your
drivers license. Take one copy and search for a digit on one of the
copies that will change the current year on your license to one that
will change your age (21). Once you have found the digit on one copy
cut it out so just the digit is there (a square segment with a little
trim around the edges is a good cut). Then take the other copy and
cut out the current last digit of the year you were born in basically
the same shape as the last. Put the cut out digit under the copy that
you had cut out your current digit of the year you were born. Now
having a little trim around the cut out digit from the first copy
will assist you when lining it up under the second copy when you put
it in the copy machine. Now that you have the new digit from the
first copy sitting underneath but showing on the second copy place it
in the copy machine and make a copy so that you will have an original
of the new base part of the license.
Now since most copy machines are black and white you will have to cut
away the states license on the top of the license (e.g. Illinois
License). Now place the new base of the license with the cut away
license name over the old base of the current license. The new base
might not match up like it should but line it up as a good as
possible. Now place a piece of the laminated sheet cut out to
configure the license on top of the new base. Cut away any overlaps
of laminated paper and iron over the license with Mom's good old
iron.
Notes: This process has been proved to work. If you are the type of
person that looks very young then do not bother to make an ID. You
will just get caught and get into a lot of trouble. Also, be very
careful at well known bars and over 21 hang out spots. The employees
at these places tend to flash a flash light underneath the card to
see if it is transparent. It is supposed to be. With this process it
is a little hard to see through the ID so be careful with it if you
do go to a place such as this. If you are pulled over by the police
then take a corner of the license and rip. It will not affect your
original license though it maybe a little sticky but, that should not
be to big of a problem. If any bubbling occurs just iron over it and
let it sit for a while.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÿ
³ A N A R C H Y ³
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
Anarchy is freedom. Unfortunatly, freedom doesn't really exist these
days so it's necessary to fight for it. Anarchy becomes the art of
fighting for rights, for justice, for a cause. It must be done well
or you will be captured and killed by the enemy, so be careful.
Some of these articles are written by people with different views
than mine, but they offer expertise that is important to your
survival. I do not endorse attacking innocent citizens. They must be
educated and brought over to the cause. But you may have your own
agenda.
Choose your path. Just remember, karma exists.
-The Spook-
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
T E R R O R I S M
Written by: Jonin Meka of The Black Hand Society
Section One: The Essence of Terrorism
Welcome! In the following text I will attempt to explain to you the
way of Anarchy and how to be an Anarchist. One major section of
Anarchy is terrorism. Terrorism is to me the best thing ever to grace
man's path. Personally I love terrorism because, well, I really hate
strangers. Sometimes I'll decide to blow someone's car or house or
even the person all together just because they don't look right.
Terrorism defined as "mass-organized ruthlessness" and a terrorist is
defined as "one who rules by terror." Both of these descriptions are
fairly accurate but to me terrorism is the hatred of all good,
organization, love, and anything liked by normal morons who live in
our disgusting society we all call free! Therefore terrorism is the
destruction of society. I love that! To be a terrorist you must have
this attitude!
Don't read any farther unless you are a terrorist. Well, now the we
all have the understanding of terrorism we can begin. Note: you don't
have to kill to be a terrorist. Just be sure you love love to cause
terror!
Section Two: Simple Terrorism
Before I write anymore I must tell you I'm writing this article
because I wish to spread terroristic ideals. Also I wish to tell you
that Black Hand Society rules. Well, on with it. The following are
some of my own little goodies that I like to do once in a while. This
article does not explain how to make destruction devices or any of
that kind of stuff. That will be covered by others.
And finally one more thing; I find experimentation is best when
trying to terrorize someone or something. Here we go!
[1] SHOPLIFTING
Ahhh...my favorite. Here is the best and most economical way to
obtain anything you desire: Shoplifting! One note: this is highly
dangerous in these days of hidden cameras and microphones so be very
careful and if all else fails and you're caught but some stupid moron
of a "store-detective" just be sure to keep a cube of "potassium
chloride plastic explosives" with so you can light it while the moron
has you by the arm and is taking you wherever it is they take you
when your caught. Well on to some safety clauses. For one always be
silent while shoplifting as of the microphones (if any). Next always
look for two-way mirrors, black spots on any store walls, and most of
all people who stay in a store for more than an hour- They're Narcs !
And now for some advanced techniques. One I find to be fun is to
stuff my jacket then go up to the register and then buy something
small ! That really confuses the people. Another trick is to have
your friend buy something while you talk to him and at the same time
have a goodie right in your own hand then just walk out of the store
still talking with your friend. One last thing- bagging goods with
stuff you already bought is stupid unless the store doesn't give
receipts but what the f--k is you're good enough!
[2] ILLEGAL ENTRY
Another of my favorites. What is there really to say about illegal
entry except for it is a great way to attract attention to a
neighborhood. I mean with all the cops that come around the next day.
Also this is a great way to obtain valuable goodies like electronic
equipment. One thing never do this in your own neighborhood because
you won't be able to use the goodies you obtain.
Never break into a house with people in it if you are trying to
obtain goodies and also never break into a house with an alarm.
Always observe the area you're going to break into before entering
and look through the window next to the front door to see if they
have an alarm. There are several ways to break in: One is to lock
pick your way through but to the novice this may take time and years
of learning but one advantage is that it is real silent and
undetectable. Another way is to use the BB gun Ice pick method. First
bring your BB gun (pistol preferable) and shoot a small hole next to
the lock. Then use the Ice pick or some other device to undo the lock
on the window. Never leave anything of yours at the scene. Catalog
numbers and the like are traced quickly.
One final way to enter is to just crash the window with a stick. This
is really noisy but fun. If you want to do this the target window
should be next to another noisy place like a street or something.
Also don't spend to much time in the place after entering and most
off wear gloves and a black suit and always enter a night. One
more,thing I find it enjoyable to paint some type of remark or
sarcastic saying (real big of course) on one of the main walls. Such
an example would be a certain symbol like a pentagram or a saying
like "fuck off" (simple but suggestive) or to be creative "you have
bad taste in panties and curtains" or my favorite "pigs have little
dicks." Most of all be creative when signing you're little messages
usually I sign them by putting "You're worst dream" and "love, John".
You may find it wasteful to write such messages but personally I
think terrorism should be funny, sarcastic, and confusing. Two more
things: try not to leave any trace of yourself such as articles of
your clothing or even your blood (you might cut yourself if you break
the window). And if you consider yourself a common thief, DON'T! You
are an Anarchist and a Terrorist!
[3] ASSORTED FUN
Here are other simple things you might like to do:
A) Enter a place with people in it and sneak up them and then totally
surprise the fuck out of them while they're sleeping. You might do
this by screaming and hollering at the foot of their bed or by
setting their bedroom curtain on fire and then scream and holler at
the foot of their bed. Scream "Get out the house! There's a fucking
fire!" Just be sure these people don't have gunes and you have a
quick exit route. One way to be sure of this is case their house
ahead of time. If you find a gun near the bed, unload it or fuck up
the firing pin so it can't be fired. That way you have the drop on
them. In any event, this one is dangerous.
If the husband is away on business, you might decide to pretend to be
the husband and molest the wife while she's sleeping. Think of the
possibilities. Pretending to be the husband is my favorite
because....well I'm horny. I start off by gently massaging the
women's breast and then taking my other hand and venturing into
beaver land !
Another thing I find enjoyable is if the the women is alone in the
house I do the above but when she wakes up I simply knock her out
with the stick I used to break in with. If you plan to do this be
sure that as soon as she opens her eyes you give her a swift blow to
the head. Don't wait for her to scream for God's sake! Better yet, if
you have some, put a LIGHT dose of cloroform on a rag and make her
breath it. As soon as she passes out, take it away as it can kill
her. Another means of subduing a woman is fear. Pint a gun or knife
at her head while stuffing a rag in her mouth and make her submit. A
good method is to handcuff them before they wake up so they can't
fight you too easily.
After you have her subdued, fuck her to your heart's content. One more
thing if you're really horny I suggest you tie her up and then wait
for her to wake. Put a ball gag in her mouth, or improvise with a
rubber ball and some duct tape.
Tie her with her legs spread for maximum access. If you're into anal
sex, tie her face down. Just be sure she doesn't get a good look at
your face. Wear a stocking or pantyhose on your head or a ski mask.
Oh, and be sure to practice safe sex. Heh heh...
Note: I do not consider this rape! It is not! It is terrorist tension
relief. Also it was done under pleasant circumstances.
B) Letting the air out of people's car tires has always been fun but
I prefer to blow the tires up with impact explosives better. Also I
recommend blowing up the whole car. This is not only fun but it makes
great reading light. May I also suggest you do the above before you
read the rest of the manual. That way after you blow the car up you
can sit next to a great reading light and read some more of this
manual while the car burns. And finally one more thing- I love to
watch the people scurrying trying to put the car out. I mean if they
had any brains they would not it is impossible especially if you put
a buck of Napalm in their front seat. Also I suggest you paint the
ground surrounding the car with impact explosives. That way when the
car blows up (or just starts on fire) as soon as the people run to
the car and watch it burn they'll step on the dried explosives and
blow themselves up. Note: This is really cruel but what the hell!
You're a terrorist!
C) Lastly, suggest you...well fuck I'll let you create your own
little goodies for you to do. I've given you a start now go out and
experiment! Note: I have lots more but I don't want to give away all
my secrets.
Section Three: Destruction (and death as a result)
Many of you I suspect don't want to become murderers so I suggest you
don't read any further. It takes a great hatred to kill a human being
and I highly recommend you don't do it. Not only is it really evil
but you will have severe guilt trips and may even commit suicide as a
result. Personally I don't care anymore and could give a fuck about
everything, but occasionally I do regret all the things I've done.
Please don't read the rest of the artical unless for entertainment
purposes otherwise welcome to the world of Hell. (ha ha ha!)
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
A S S A S S I N A T I O N T E C H N I Q U E S
Preface
-------
If you do indeed take the information provided in this article
seriously enough to do it, please forget where you read it.
Poisons:
--------
The first and probably least known way to maim(such a nice word)
someone is through the use of various herbal extracts..(no I don't
mean Sinsemella)
Diffenbachia (dumbcane)
=-=-=-=-=-=-=-=-=-=-=-=
Take 2-4 of the leaves and boil them in water (don't inhale the
fumes) When the water becomes a greenish color, take the leaves and
throw them away..Now take the liquid and add it to the victims
drink,food etc..The victims voice goes kaput.
Oleander.
=-=-=-=-=
Take a twig of this bush and grind it into a fine powder..Place the
powder in the salt shaker,or sub-stitute it for any other type of
seasoning...Causes death within 3-4 hours...sometimes quicker
Poison Oak/Ivy.
=-=-=-=-=-=-=-=
Take the leaves and do the above process..Or boil the leaves and when
the water turns brownish/green pour it out into a vial...Add a few
drops to the victims beverage.. It tends to destroy the victims vocal
cords...
Systemic roses.
=-=-=-=-=-=-=-=
Take a rose bush and soak the ground around it with a very poisonous
fertilizer..In the days following the roses leaves,stems,etc will
become highly deadly..When the victim gets scratched by it..He/she
dies..
Poisons Part 2
--------------
The second and more common poisons are that of deadly metals and
earthy extracts.
Sodium Arsenide.
=-=-=-=-=-=-=-=-
This along with Lead Arsenide rank in the top ten of lethal
materials Sodium Arsenide can be acquired at a glass staining shop..It
is placed into the victims food,etc.
Potassium Cyanide.
=-=-=-=-=-=-=-=-=-
This is chemical is contained in appleseeds..To get it you must grind
up about 12 oz of apple seeds ..The effect is close to radiation
poisoning...It kills within 6 hours
Curare.
=-=-=-=
This substance is basically a ba28rd poison..It is various poisons
combined into a lethal dosage..It kills within 45 minutes.
Lead.
=-=-=
Although this material is very common it is also very deadly..Take
about 30-40 grams of lead shavings(dust) and put them in someone's
food.. It does wonders....<ack!>
Mercury.
=-=-=-=-
Mercury is a highly deadly material that kills skin on contact...To
use most effectively,place about 20 grams wherever the victim might
place his hand or any other part of his body for that matter..Or
place it in his food supply...It to does wonders...<ack!>
Others (Unknown!)
=-=-=-=-=-=-=-=-=
Although it is impossible to list all of the deadly substances here I
will show how to make contact poison...
(credit to Ima Hacker) take 3 no-fly pest strips (tm) place them in a
jar of turpentine overnight..In the morning scoop out the white/brown
gel at the bottom.
it kills in 60 seconds..Count 'em
(again credit must go to Ima Hacker)
Highway Accidents???
--------------------
The following section describes various was to seriously harm the
occupant by destroying the victims car...
Explosions
=-=-=-=-=-
Take a film canister filled with liquid drano and drop it into the
gas tank...Do this just before your target enters his car...When he's
driving down the freeway or any other part of the HTS his car will
suddenly become engulfed in flame.
Carbon Monoxide (CO)
=-=-=-=-=-=-=-=-=-=-
Drill a small hole into the exhaust system of the victims car..From
it run a length of tubing into the passenger compartment..After 20
minutes he will fall onto the floor and most probably die when he
hits something.
Stuck Accelerator
=-=-=-=-=-=-=-=-=
Find the victim's throttle cable and cut it..now follow the piece
coming out of the manifold..Now supposing you found where it
intersects the valve...There should be a small spring there that
keeps the valve closed...Cut it...push the valve open....clean
up...When Mr. Victim starts his car the engine will race. when he
shifts he should fly out of control down the roadway..until <KERASH>
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
EFFECTIVE NECK-BREAKING TECHNIQUES
*Crossneck*
This method will only work if you are much taller (1 1/2 - 2 feet)
than your target, or the target is sitting down (guards, teachers,
etc.)
Approach the target from the behind SLOWLY as not to startle, then
place your left arm around the neck, and the right arm across the
neck (over the left) and grab your upper-left arm with your right
arm. Move the right arm upward sharply, and the left arm left firmly
around the neck. Pop the neck out of the spinal cord, and separate
the head from the rest of the body. The neck should be quite
twistable now. Damage the spinal cord, so the victim has little/no
hope for survival. Don't even think about whipping out a knife.
This method is for killing without leaving a single mark.
*Throat demolition*
When using this technique, be sure to rid your conscience of any
regrets while attempting this. You will be staring your victim eye-
to-eye, and you don't want to cower out. Your victim will have a
scared-shitless look of "Why me?" They will look so innocent, it
might make you chicken out. Check out "The Cypher's guide to the
elimination of the conscience" if you have these problems. It could
mean the difference between life and death...
Creep up to your mark while they are leaning over (reading, loading
gun, etc.) Stare down at what they're doing by their RIGHT side, then
place the left arm around the neck from the underside. In other
words, extend the right arm under their chin, then reach back around
to the back of the head. Grab the neck tightly, place your shoulder
on their chest, flip them over onto the table or floor, then punch
them AS HARD AS YOU CAN right in the throat.
I'm not sadistic (yeah, sure, you say,) and I am somewhat of an
animal lover, but a good way to practice this technique is with pigs.
Go down to any forestry project, and then find out where some of the
pigs are... This will not be too hand to do. Just look for severe
underbrush. Wait, and they will come. Ambush from behind, and the
pigs neck is yours. Im not sure if this kind of hunting is legal
(bare hands) but it is essential for proper exercises in the art of
the elimination of the conscience.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
EXPLOSIONS: Effective demolition.
We will be using this brand of Pipe Bomb in most all of our
elimination exploits:
One 1 foot length of pipe (threaded)
two caps for the ends of the pipe.
one baby-food jar
about a baby-food jar full worth of vinegar
baking soda
some gravel
To construct the pipe bomb:
1. Cap one end of the pipe with a metal cap TIGHTLY!
2. Fill the baby-food jar with vinegar, cover, AND WIPE CLEAN!
3. Drop the baby-food jar into the pipe lightly as not to break, and
add some gravel.
4. Pour baking soda to the rim into the pipe bomb.
5. Cap the other end very tightly.
Synopsis:
Once you crack the pipe hard enough to break the baby food jar, it
will cause the baking soda to create such pressure, that it will
explode. The explosion is more than effective. Rumor has it that
when it was thrown into an old car, it blew the doors about ten feet
away, and the roof three feet into the air. When this device was
constructed by myself, I just stuck it under an old tree, and it was
removed. You have about five minutes to wait, so you might still have
time to acquire a quick alibi.
USING THE PIPE/PRESSURE BOMB
Someone you hate? Well, creep out of your house REAL LATE at night
(3-4:00) and walk up to their house. Crack it to start on the
driveway, and throw under the car. Run home, then read the police
reports. Once you have been better acquainted with device, it can be
used to help you out. Throw it under the stage of a play, or leave
it in the bathroom of your school, etc.
MOLOTOV COCKTAILS IMPROVED
Well, the original Molotov cocktail was used differently.. Its not
REALLY improved, but its better this way. Molotov created this
weapon in the Russian revolution (give them a taste of their own
medicine) and the formula was 50% gasoline, alcohol, and 50% oil.
With the oil, it sticks to what it hits. Much more effective...
MODIFYING MOST SEMI-AUTOMATICS
Whats this B.S. about spending $3000 for a full-auto kit? All we did
was file down the firing pin, and it worked almost perfectly. File
down the part by the springs that rubs against the tracks, so it is
free. This works best with a good-old M-16, or most HK rifles.
SURVIVALIST PYROTECHNICS
It is almost imperative for the modern-day snow camper to carry
around a bit of gasoline (I know, only the shitbaits do that, but the
wind gets pretty rough out there) with you. Once that much has been
done, you are ready for the Survivalist's bomb: in other files, the
GENERIC BOMB. This bomb is infamous among bulletin boards, but
because it suits this method better, I call it the survivalist's bomb.
1 jar, pipe, etc. few drops of gasoline. a few drops of potassium
permanganate found in most all snakebite kits
I. Put in a few drops of gas into the jar, pipe, etc... and coat
the surface inside.
II. Once the gas has evaporated, put in a few drops of Pot.
Permangate, and close the jar shut.
Throw the jar at your target, or the truck under you, or into the
crowd at the mardi-gras and be far away. This bomb will pack 1/2
stick of standard GCM dynamite. Handy, indeed.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
Miscellaneous Nasties
By: Lex Luthor
FIREBOMBS
Most fire bombs are simply gasoline filled bottles with a fuel
soaked rag in the mouth (the bottle's mouth, not yours). The original
Molotov cocktail, and still about the best, was a mixture of one part
gasoline and one part motor oil. The oil helps it to cling to what it
splatters on.
Some use one part roofing tar and one part gasoline. Fire bombs have
been found which were made by pouring melted wax into gasoline.
NAPALM
About the best fire bomb is napalm. It has a thick consistency,
like jam and is best for use on vehicles or buildings.
Napalms is simply one part gasoline and one part soap. The soap is
either soap flakes or shredded bar soap. Detergents won't do.
The gasoline must be heated in order for the soap to melt. The usual
way is with a double boiler where the top part has at least a two-
quart capacity. The water in the bottom part is brought to a boil and
the double boiler is taken from the stove and carried to where there
is no flame.
Then one part, by volume, of gasoline is put in the top part and
allowed to heat as much as it will and the soap is added and the mess
is stirred until it thickens. A better way to heat gasoline is to
fill a bathtub with water as hot as you can get it. It will hold its
heat longer and permit a much larger container than will the double
boiler.
MATCH HEAD BOMB
Simple safety match heads in a pipe, capped at both ends, make a
devastating bomb. It is set off with a regular fuse
A plastic Baggie is put into the pipe before the heads go in to
prevent detonation by contact with the metal.
Cutting enough match heads to fill the pipe can be tedious work for
one but an evening's fun for the family if you can drag them away
from the TV.
FUSE IGNITION FIRE BOMB
A four strand homemade fuse is used for this. It burns like fury.
It is held down and concealed by a strip of bent tin cut from a can.
The exposed end of the fuse is dipped into the flare igniter. To use
this one, you light the fuse and hold the fire bomb until the fuse
has burned out of sight under the tin. Then throw it and when it
breaks, the burning fuse will ignite the contents.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
P Y R O M A N I A C T E C H N I Q U E S
IMPACT GRENADES
1] MIX SOLID NITRIC IODINE WITH HOUSE-HOLD AMMONIA
2] WAIT OVERNIGHT
3] POUR OFF THE LIQUID
4] LET THE 'MUD' ON THE BOTTOM DRY... (IT'S LIKE CONCRETE)
5] THROW IT AT SOMETHING!!!
SMOKE BOMBS
1] MIX : 3 PARTS SUGAR TO 6 PARTS EPSON SALTS
2] PUT IT IN A TINCAN (COFFEE CAN WILL DO)
3] HEAT IT OVER LOW FLAME (LIKE A CIGARETTE LIGHTER)
4] LET GEL AND HARDEN
5] PUT A MATCH IN AS A FUSE.
6] LIGHT IT AND RUN LIKE HELL........(4 POUNDS OF THE STUFF WILL FILL
A CITY
BLOCK WITH THICK WHITE SMOKE
MEDIUM-GRADE EXPLOSIVES
1] MIX : 7 PARTS POTASSIUM CHLORATE
1 PART VASELINE
2] TO IGNITE, USE AN ELECTRIC CHARGE OR A FUSE.
CAR BOMB
1] PUT LIQUID DRANO INTO A PRESCRIPTION BOTTLE (THE SMALL BROWN PILL
BOTTLES)
2] CLOSE THE LID AND POP IT INTO THE GAS TANK (OR A BOTTLE OF
GASOLINE IF YOU
WANT TO MAKE A SIMPLE TIME-BOMB)
3] WAIT 5 MINUTES.....
4] RUN LIKE HELL
PLASTIC EXPLOSIVES
1] MIX : 2 PARTS VASELINE 1 PART GASOLINE
2] IGNITE IT WITH AN ELECTRIC CHARGE.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
L O C K P I C K I N G
SO YOU WANT TO BE A CRIMINAL. WELL, IF YOU ARE WANTING TO BE LIKE
JAMES BOND AND OPEN A LOCK IN FIFTEEN SECONDS, GO TO HOLLYWOOD
BECAUSE THAT'S THE ONLY PLACE YOUR GONNA DO IT. EVEN EXPERIENCED
LOCKSMITHS CAN SPEND 5 TO 10 MINUTES ON A LOCK IF THEY'RE UNLUCKY. IF
YOU ARE LOOKING FOR EXTREMELY QUICK ACCESS, LOOK ELSEWHERE.
THE FOLLOWING INSTRUCTIONS WILL PERTAIN MOSTLY TO THE "LOCK-IN-KNOB"
TYPE LOCK, SINCE IT IS THE EASIEST TO PICK. IF THERE IS SUFFICIENT
DEMAND, I WILL LATER WRITE A FILE DISCUSSING THE OTHER FORMS OF
ENTRANCE, INCLUDING DEAD-BOLT
FIRST OF ALL, YOU NEED A PICK SET. IF YOU KNOW A LOCKSMITH, GET HIM
TO MAKE YOU A SET. THIS WILL BE THE BEST POSSIBLE SET FOR YOU TO USE.
IF YOU FIND A LOCKSMITH WILLING TO SUPPLY A SET, DON'T GIVE UP HOPE.
IT IS POSSIBLE TO MAKE YOUR OWN, IF YOU HAVE ACCESS TO A GRINDER (YOU
CAN USE A FILE, BUT IT TAKES FOREVER.)
THE THING YOU NEED IS AN ALLEN WRENCH SET (VERY SMALL). THESE SHOULD
BE SMALL ENOUGH TO FIT INTO THE KEYHOLE SLOT. NOW, BEND THE LONG END
OF THE ALLEN WRENCH AT A SLIGHT ANGLE..(NOT 90 DEG.) IT SHOULD LOOK
SOMETHING LIKE THIS:
#1
\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\s\\\\\\\ (THIS IS THE HANDLE
\\\ THAT WAS ALREADY
\\\ HERE.)
\\\
\\\
\\\
NOW, TAKE YOUR PICK TO A GRINDER OR A FILE AND SMOOTH THE END (#1)
UNTIL IT'S ROUNDED SO IT WON'T HANG INSIDE THE LOCK. TEST YOUR TOOL
OUT ON DOORKNOBS AT YOUR HOUSE TO SEE IF IT WILL SLIDE IN AND OUT
SMOOTHLY.
NOW, THIS IS WHERE THE SCREWDRIVER COMES IN. IS IT SMALL ENOUGH FOR
IT AND YOUR PICK TO BE USED IN THE SAME LOCK AT THE SAME TIME, ONE
ABOVE THE OTHER ? LETS HOPE SO, BECAUSE THAT'S THE ONLY WAY YOUR
GONNA OPEN IT.
IN THE COMING INSTRUCTIONS, PLEASE REFER TO THIS CHART OF THE
INTERIOR OF A LOCK:
XXXXXXXXXXXXXXXXXXXXXXX| K
# # # # # # | E
# # # # | Y
* * | sH
* * * * * * | O
| L
| E
XXXXXXXXXXXXXXXXXXXXXXX|
#= UPPER TUMLER PIN
*= LOWER TUMLER PIN
X= CYLINDER WALL
(THIS IS A GREATLY SIMPLIFIED DRAWING)
THE OBJECT IS TO PRESS THE PIN UP SO THAT THE SPAcE BETWEEN THE
UPPER PIN AND THE LOWER PIN IS LEVEL WITH THE CYLINDER WALL. NOW, IF
YOU PUSH A PIN UP, ITS TENDENCY IS TO FALL BACK DOWN, RIGHT ? THAT IS
WHERE THE SCREWDRIVER COMES IN.
INSERT THE SCREWDRIVER INTO THE SLOT AND TURN. THIS TENSION WILL KEEP
THE "SOLVED" PINS FROM FALLING BACK DOWN. NOW, WORK FROM THE BACK OF
THE LOCK TO THE FRONT, AND WHEN YOU'RE THROUGH.....
THERE WILL BE A CLICK, THE SCREWDRIVER WILL TURN FREELY, AND THE DOOR
WILL OPEN. DON'T GET DISCOURAGE ON YOUR FIRST TRY! IT WILL PROBABLY
TAKE YOU ABOUT 20-30 MINUTES YOUR FIRST TIME. AFTER THAT YOU WILL
QUICKLY IMPROVE WITH PRACTICE.
THIS IS BY NO MEANS THE MOST EFFICIENT WAY OF ENTERING A HOUSE. IF
YOU WOULD LIKE ANOTHER ITEM OR TWO DEVOTED TO THESE OTHER WAYS, LET
THE SYSOP KNOW.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
How to Make a Land mine
by
Merlin and Black knight
First you need to get a push button switch... take the wires of it
and connect one to a 9 volt battery connector and the other to a
solar igniter (if you can't get that then use a thin piece of stereo
wire).
Connect the other wire of the 9 volt connector to to the other end of
the solar igniter (stereo wire).
Now... connect the end of a fuse (of a pipe bomb, M80, whatever has a
fuse) to the solar igniter...
Dig a hole... not to deep but enough to cover all the materials.
Think about what direction your enemy will coming from and plant the
switch, but leave the button visible (not to visible). Plant the
explosive about 3 feet from the switch because there will be a delay
in the explosion. And when your enemy steps on it...
B O O M ! ! !
-------------------
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
H I G H W A Y R A D A R J A M M I N G
Most drivers wanting to make better time on the open road will arm
themselves with an expensive radar detector. However this device
will not work against a gun type radar unit in which the radar signal
is not present until the cop has you car in his sights and pull the
trigger. Then it is too late to slow down.
A better method is to continuously jam any signal with a radar signal
of your own. I have tested this idea with the cooperation of a local
cop and found that his unit reads random numbers when your car
approached him. It is surprisingly easy to make a low power radar
transmitter. A nifty little semiconductor called a Gunn diode will
generate microwaves when supplied with 5 to 10 vdc and enclosed in
the correct size cavity (resonator). An 8 to 3 terminal regulator can
be used to get this voltage from a car's system. However the correct
construction and tuning of the cavity is difficult without good
microwave measurement equipment. Police radars commonly operate on
the K band at 22 ghz. or more often on the X band at 10.525 ghz.
Most microwave intruder alarms and motion detectors (mounted over
automatic doors in supermarkets, etc.) contain a Gunn type
transmitter/receiver combination that transmits about 10 milliwatts
at 10.525 ghz. These units work perfectly as jammers. If you can't
get one locally write to Microwave Associates in Burlington, Mass.
and ask for info on "Gunnplexers" for ham radio use. When you get
the unit it may be mounted in a plastic box on the dash or in a
weatherproof enclosure behind the plastic grille. Switch on the
power when on the open highway. The unit will not jam radar to the
side of behind the car so don't go speeding past the radar trap.
An interesting phenomena you will notice is that drivers in front of
you who are using detectors will hit their brakes as you approach
large metal signs or bridges. Your signal is bouncing off these
objects and triggering their detectors.
Have fun... Cryton
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
FIREWORKS
OK, SO YOU WANT TO KNOW HOW TO MAKE YOUR OWN FIREWORKS? NOTE: ALL
THE AMOUNTS GIVEN IN THESE DIRECTIONS ARE IN PARTS BY WEIGHT. DO NOT
USE PARTS BY VOLUME (LIKE TEASPOONS OR SOMETHING), OR ELSE YOU COULD
HAVE A SERIOUS PROBLEM. ALWAYS MIX THESE CHEMICALS BY SHAKING THEM ON
A SHEET OF PAPER OR SOMETHING. IF YOU GRIND THEM, STIR THEM, ETC.
THEY COULD EXPLODE IN YOUR FACE!(AFTER ALL, I DON'T WANT YOU TO KILL
YOURSELF WHILE DOING THIS!)
FUSE:
1. DISSOLVE AS MUCH POTASSIUM NITRATE AS YOU CAN IN ABOUT A PINT OF
WATER AT ROOM TEMPERATURE.
2. SOAK 5-6 INCH PIECES OF STRING OR PAPER IN THIS SOLUTION AND LET
THEM DRY.
3. LIGHT THE FIREWORKS WITH THE STRING OR A PIECE OF PAPER ROLLED
INTO A TIGHT TUBE.
FLASH POWDER:
1. MIX: 1 PARTS POWDERED MAGNESIUM METAL and 4 PARTS POWDERED POTASSIUM
NITRATE.
2. IGNITE WITH A VERY LONG FUSE. THIS STUFF EXPLODES WITH A HUGE
WHITE FLASH, AND MAY BE BRIGHT ENOUGH TO SCREW UP YOUR EYES IF YOU
LOOK STRAIGHT AT IT.
"SNAKES":
1. MIX: 5 PARTS POTASSIUM NITRATE
10 PARTS POTASSIUM DICHROMATE
5 PARTS REGULAR SUGAR
2. MIX THESE POWDERS WITH ENOUGH MUCILAGE OF ACACIA (THAT GOOEY
BROWN GLUE YOU CAN GET AT A DRUGSTORE) SO THAT YOU CAN MOLD THEM INTO
CONES ABOUT 1/2 AN INCH HIGH.
3. WHEN DRY, LIGHT THE TIPS OF THE CONES WITH A MATCH.
FOUNTAIN #1:
1. MIX: 1 PART POWDERED MAGNESIUM METAL
1 PART POWDERED IRON METAL
1 PART POWDERED ZINC METAL
1 PART ANTIMONY SULFIDE
1 PART POWDERED CHARCOAL
1 PART POWDERED SULFUR
1 PART LYCOPODIUM POWDER
1 PART POWDERED SUGAR
1 PART POTASSIUM NITRATE
2. COAT A CARDBOARD TUBE AND PLUG THE BOTTOM WITH PLASTER OF PARIS
(THIS IS SO IT WON'T BURN).
3. FILL THE TUBE WITH THE MIXTURE, INSERT A FUSE, AND LIGHT IT.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
NASTY TRAPS
Traps are the vital part of any assassin's strategy. So if you are
going to be a dealer of death you must learn the art of trap
building..
All traps don't have to kill, the following traps are made to wound
the victim and make the kill easier...
Trap #1-Foot trap
-----------------
You will need the following items:
1) 8-10 bungi sticks about 7 inches long each. [Note]: Bungi sticks
are just sticks that have one end sharpened to a point. I you want
to get fancy 1-1/2 inch dowel works great!
2) A shovel
3) A victim
First off pick a spot where the victim will walk that is soft ground
or dirt. Then proceed to dig a hole about 2-3 feet deep and about 2
feet in diameter. Once the hole is dug take the bungi sticks and line
the hole with them so that they are pointing downward at an angle
like this:
hole wall--> !\ <--bungi stick--> /! <--hole wall
!\ /!
!---------------------!
Cover the hole to match the ground cover (use twigs and leaves with
dirt or whatever matches on top) and find a nice hiding spot. When
the victim steps into the hole the stakes will do nothing to him but
maybe snag his pants, but when he tries to remove his foot he will be
going against the stake and they will drive into his ankle...
[P.S.]-For a nice touch you could also put the stakes on the hole
floor...
Trap #2-Light Bulb Trap
-----------------------
To make this trap work you must have access inside the victim's house
and it helps if you don't like them very much. To start get a bottle
of ammonia, and put some in a sealable container that it won't eat
through. Next, acquire a medical syringe. Go to the house of the
victim and get into a room by yourself. Go to the nearest lamp or
light fixture that has a light bulb in it and remove the light bulb.
Make sure the lamp or socket is turned OFF.
Fill the syringe with the ammonia and make a small puncture in the
light bulb. It may sound impossible but it's actually pretty easy.
Once you have the ammonia touching the filament in the light bulb
stop injecting and replace the bulb. Leave the room and try and stay
out of there until the light is turned on. When it is turned on the
red hot filament and the ammonia do all sorts of fun stuff!!....
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
BLASTING GELIGNITE
To try and tell you about the potency and danger of this stuff, I
want you to know that one time some friends of mine and I (Disk
Slasher, Romper Stomper) were very careful and made some of this
stuff. After it was made, we were scared as shit of it and carried it
on a ten foot pole. (literally!) Near to my house there is a club
that has a Coke machine outside. So we went over there at about 3 in
the morning and stuck this stuff all over the Coke Machine and set it
off. The whole Coke Machine damn near split in two (well anyway the
front door was blown off) and the Cokes and money came spilling out
We helped ourselves to both and got the hell out of there which was
good because the police and fire department were there in about 15
minutes because all the people around that the blast had waken up had
called them because they thought there was a fire or something. So if
you make this stuff (Which we don't endorse you doing) BE CAREFUL!
The Recipe:
Note: None of these items are too hard to get but you damn well
better not think that this stuff is not powerful because of that. if
you think that, you had better get prepared to lose part of your
body.
Further Note: A step marked with a star '*' should be done behind a
blast shield of some kind. We used a big sheet of plexiglas.
Stuff you need
1) 50 parts water
2) 20 parts sugar (provides oxygen)
3) 1 part baking soda 4) 5 parts Corn Flakes (I'm not kidding,
this is VITAL as a stabilizing agent)
5) 30 parts Charcoal (Very finely ground Fish tank charcoal- No
Barbecue charcoal)
6) 10 parts Sulphur (You can sometimes get this at grocery stores
[especially Kroger] in the drug section)
7) 30 parts Saltpetre (You can also get this at grocery stores
sometimes. Kroger is the only one I know of but there might be others.
get it in the drug section.)
8) A Jar of Vaseline
The Actions...
1) Get a deep metal pan to cook over the stove on and put the water
in it. Stir in the sugar until it all dissolves. if you can't get all
of the sugar to dissolve, add more water until all of the sugar has
dissolved. Now stir in the baking soda until it dissolves. if you
can't get all of the baking soda to dissolve, don't worry about it,
just leave it.
2) Heat the pan over a medium flame (You don't need to stir) until it
begins to boil. Now stir in the corn flakes until they are all in
water and the whole thing begins to look like hot breakfast cereal.
let the mixture sit on the burner until it begins to boil again.
(This could be a long time or it could be a very short time depending
on the water and the elevation, etc.)
3) As soon as the mixture begins to boil, stir it constantly until it
is a sludgy mass that is sort of half solid and half liquid.
4) Now dump this mixture out onto a greased cookie pan (so it doesn't
stick) It should be just solid enough to almost stay in a lump. Now
mix in the Charcoal and the Sulphur. If it gets really gritty, don't
worry. Just mix it together as well as you can. Now stick in the oven
at 150 degrees. Make sure that is 150 degrees. if it is much higher,
this stuff will burn up in your oven and take your whole house with
it. Constantly monitor the pan until all of the sludge is baked dry
and has no wetness in it at all.
* 5) Get the pan out of the oven when it is ready and put it in the
refrigerator or let it cool down by itself (The refrigerator is
faster). Now take it out of the pan and pound it into dust. This
might need to be done behind a blast shield because even though I
have heard that it can't blow up or burn up if it is cool at this
stage, When I pounded up my batch I made some sparks and so I got a
blast shield just in case.
* 6) When you have the dust. put it in a tupperware or something like
that and put it, the saltpetre, and the vaseline in the fridge until
they are all cold. This definitely needs to be done behind a blast
shield as this is the part where it gets very unstable. Get a cooler
and fill it with ice and put an open container in the ice but don't
let ice get in the container. Mix all of the dust and saltpetre
together. Get a big glob of vaseline and get it nice and soft and
quickly mix as much of the dust into it as you can. If the mixture
get above about 35 degrees Celcius, it will blow up so try to not
keep it in your hands too long (I definitely advise wearing gloves to
keep your hands from heating the mixture.) When you have mixed all of
the dust possible into the lump of vaseline, drop it into the
container in the cooler and get some more vaseline and make a new
lump. When all of the dust is gone, close the container and put it in
the fridge. When you want it to blow up (And it will blow up big!)
just get it hot. We did both by sticking firecrackers in it and
lighting them and running like hell (Very Dangerous!) and by model
rocket ignition system model rocket igniters which we stuck in the
stuff.
If you are crazy and stupid enough to do this, then watch out! it is
a good way to hurt yourself.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
Car Fun
BY: System Crusher
Ok you real sick bastards so your so called friend screwed you right
so do we get mad??? Of course not JUST EVEN!! Now say he just got a
car or has a good one as it is gee let's see what fun we can have
with it:
FLAME THROWER
=============
Take a cup of gas and poor it down the exhaust pipe when the dude
starts it **POOF** he has a 30 foot flame thrower Now that doesn't do
anything that's just to make the guy shit in his pants.
PRETTY DESIGNS
==============
Ok now take his windshield wiper and attach some tacks to it Gee what
pretty designs they leave on the car window when he turns then on.
lets see:
POTATO TRICK
============
Just take your average potato and stuff it in someone's exhaust
pipe.The car wont start if there somewhere else they will have to get
it towed.If there stupid they will have to ask a mechanic Ok they
will probably have to go to a mechanic and ask to get it out boy wont
they ever look stupid! and cost them $$$$$ or a pain in the ass to do
it themselves..
Nitro triodide
==============
I saw a message on this its the ammonia and iodine mixture well you
take the shit and smear it on the tire treads and when he pulls out
**BOOM**.
-=>System Crusher<=-
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
CHEMICAL IGNITERS FROM THE BOOK:
THE POOR MAN'S JAMES BOND BY KURT SAXON
CHEMICAL DELAY IGNITERS HAVE ALWAYS BEEN POPULAR WITH THE MORE
VERSATILE MILITANTS. THE MOST COMMON SUCH IGNITER IS THE SULFURIC
ACID-POTASSIUM CHLORATE AND SUGAR GOODY.
THE IGNITER IS A MIXTURE OF HALF POTASSIUM CHLORATE AND HALF
GRANULATED SUGAR. IT BURSTS INTO FLAME WITH THE APPLICATION OF A DROP
OF SULFURIC ACID.
THE IDEA IS TO PUT SOME OF THE MIXTURE INTO A GLASS OR PLASTIC TUBE
AND THEN STUFF IN SOME COTTON, OR PAPER. SOME ACID IS THEN PUT INTO
THE TUBE WITH A MEDICINE DROPPER, BOUGHT AT A DRUG OR HOBBY STORE.
THE ACID IS SUPPOSED TO SEEP SLOWLY THROUGH THE BARRIER AND FINALLY
IGNITE THE MIXTURE. THE BAD THING ABOUT THIS SYSTEM IS THAT IT OFTEN
DOESN'T WORK OR IT WORKS TOO FAST.
WHEN SULFURIC ACID EATS THROUGH VEGETABLE MATTER THERE IS A REACTION
OF GREAT HEAT. THIS IS OFTEN ENOUGH TO BREAK THE GLASS TUBINGOR MELT
A PLASTIC DRINKING STRAW AND CAN STOP THE ACTION RIGHT THERE.
IF THE GLASS TUBING HOLDS, THE ACID STILL LOSES ITS POTENCY AS IT
REACTS WITH THE VEGETABLE MATTER AND THAT WHICH REACHES THE MIXTURE
MAY BE TOO WEAK.
THE WORST THING THAT CAN HAPPEN, HOWEVER, IS THAT IT WILL WORK TOO
FAST. THE ACID CAN EAT THROUGH THE BARRIER IN SECONDS INSTEAD OF THE
MINUTES YOU THINK YOU HAVE.
THIS COULD BE DISASTROUS IF YOU LOITERED IN THE AREA FOR A MINUTE TO
AVOID LOOKING SUSPICIOUS. IF YOU ARMED THE DEVICE BEFORE GOING INTO
THE TARGET AREA, YOU MIGHT NOT EVEN GET THERE.
TO AVOID SUCH HANGUPS YOU SHOULD USE A NON-REACTIVE BARRIER SUCH AS
ASBESTOS FIBERS, BOUGHT FROM ANY BUILDING SUPPLY STORE. THE ACID WILL
SEEP THROUGH THE ASBESTOS FIBERS, MAKING HEAT AND WITH-OUT LOSING ITS
POTENCY. AND SINCE IT DOESN'T EAT THE ASBESTOS, IT CAN BE TIMED WITH
MUCH MORE CERTAINTY, WHICH MAKES IT SAFER AND MORE SURE.
POWDERED HIGHWAY6 FLARE IGNITER CAN BE SUBSTITUTED FOR THE POTASSIUM
CHLORATE-SUGAR MIXTURE. IT IS OVER HALF POTASSIUM CHLORATE AND IS
SIMPLER. IN FACT, IF THE PLASTIC STRAW IS PUSHED OVER A FUSE COATED
WITH FLARE IGNITER, THE FUSE NEEDS NO OTHER IGNITE R.
ANOTHER CHEMICAL IGNITION DEVICE USES GLYCERINE TO REACT WITH
POTASSIUM PERMANGANATE. POTASSIUM PERMANGANATE IS A RELATIVELY STABLE
OXYGENATOR AND CAN EASILY BE BOUGHT AT THE DRUG STORE. IT IS ALSO
USED FOR STAINING MICROSCOPE SPECIMENS, DISINFECTING FISH TANKS.
THE POTASSIUM PERMANGANATE IS GROUND TO A POWDER AND MIXED WITH THE
SAME AMOUNT OF FUSE POWDER AND MIXED WITH THE SAME AMOUNT OF FUSE
POWDER OR THE HIGHWAY FLARE IGNITER. COTTON CAN BE USED AS A BARRIER
AS IT DOESN'T REACT WITH GLYCERINE.
AT LEAST AN INCH OF GLYCERINE IS PUT INTO THE TUBE, ESPECIALLY IF YOU
USE A BARRIER. WHEN IT REACHES THE MIXTURE IT TAKES FROM THREE TO
FIVE MINUTES FOR THE IGNITION TO TAKE PLACE.
IF THE IGNITER IS POTASSIUM CHLORATE AND SUGAR OR FLARE IGNITER OR
POTASSIUM PERMANGANATE, IT NEEDS A BARRIER TO KEEP IT IN PLACE. TO
MAKE SURE THE FIRE TRAIN BURNS PAST THE BARRIER TO THE FUSE, THE
BARRIER SHOULD BE FLAMMABLE. TO MAKE MATERIAL FOR THIS BARRIER, MIX
COTTON WITH WET FUSE POWDER OR FLARE IGNITER. THEN DRY IT AND PULL
OFF PINCHES AS NEEDED.
TO ARM THESE DEVICES A MEDICINE DROPPER FILLED WITH ACID OR GLYCERINE
CAN BE CARRIED UP-ENDED IN A TEST TUBE IN THE SHIRT POCKET. A PLASTIC
FELT-TIP MARKER WITH A CLIP TO HOLD IT UPRIGHT IN THE POCKET CAN BE
USED INSTEAD OF THE TEST TUBE. IT IS SIMPLY HOLLOWED OUT AND THE
DROPPER FITS IN NICELY.
TO AVOID BURNED FINGERS, A STRING IS TIED TO THE DROPPER SO IT CAN BE
PULLED OUT OF THE CONTAINER.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
The Chemist's Corner Article #1: Explosives By Zaphod Beeblebrox/MPG
This article deals with the instructions for creating some dangerous
explosives. If you intend to make any of these explosives, do so in
SMALL AMOUNTS ONLY, as they are all dangerous and could seriously
injure or kill you if done in larger amounts. If you don't know
anything about chemistry, DON'T DO THESE EXPERIMENTS! I am not joking
in giving this warning. Unless you have a death wish, you shouldn't
try any of the following unless you have had prior experience with
chemicals.
I am not responsible for any injury or damage caused by people using
this information. It is provided for use by people knowledge in
chemistry who are interested in such experiments and can safely
handle such experiments.
I. Common "weak" explosives.
A. Gunpowder:
75% Potassium Nitrate
15% Charcoal
10% Sulfur
The chemicals should be ground into a fine powder (separately!) with
a mortar and pestle. If gunpowder is ignited in the open, it burns
fiercely, but if in a closed space it builds up pressure from the
released gases and can explode the container. Gunpowder works like
this: the potassium nitrate oxidizes the charcoal and sulfur, which
then burn fiercely. Carbon dioxide and sulfur dioxide are the gases
released.
B. Ammonal:
Ammonal is a mixture of ammonium nitrate (a strong oxidizer) with
aluminum powder (the 'fuel' in this case). I am not sure of the %
composition for Ammonal, so you may want to experiment a little using
small amounts.
C. Chemically ignited explosives:
1. A mixture of 1 part potassium chlorate to 3 parts table sugar
(sucrose) burns fiercely and brightly (similar to the burning of
magnesium) when 1 drop of concentrated sulfuric acid is placed on it.
What occurs is this: when the acid is added it reacts with the
potassium chlorate to form chlorine dioxide, which explodes on
formation, burning the sugar as well.
2. Using various chemicals, I have developed a mixture that works
very well for imitating volcanic eruptions. I have given it the name
'MPG Volcanite' (tm). Here it is: potassium chlorate + potassium
perchlorate + ammonium nitrate + ammonium dichromate + potassium
nitrate + sugar + sulfur + iron filings + charcoal + zinc dust + some
coloring agent. (scarlet= strontium nitrate, purple= iodine crystals,
yellow= sodium chloride, crimson= calcium chloride, etc...).
3. So, do you think water puts out fires? In this one, it starts it.
Mixture: ammonium nitrate + ammonium chloride + iodine + zinc dust.
When a drop or two of water is added, the ammonium nitrate forms
nitric acid which reacts with the zinc to produce hydrogen and heat.
The heat vaporizes the iodine (giving off purple smoke) and the
ammonium chloride (becomes purple when mixed with iodine vapor). It
also may ignite the hydrogen and begin burning.
Ammonium nitrate: 8 grams
Ammonium choride: 1 gram
Zinc dust: 8 grams
Iodine crystals: 1 gram
4. Potassium permanganate + glycerine when mixed produces a purple-
colored flame in 30 secs-1 min. Works best if the potassium
permanganate is finely ground.
5. Calcium carbide + water releases acetylene gas (highly flammable
gas used in blow torches...)
II. Thermite reaction.
The Thermite reaction is used in welding, because it generates molten
iron and temperatures of 3500 C (6000F+). It uses one of the previous
reactions that I talked about to START it!
Starter=potassium chlorate + sugar
Main pt.= iron (III) oxide + aluminum powder (325 mesh or finer)
Put the potassium chlorate + sugar around and on top of the main pt.
To start the reaction, place one drop of concentrated sulfuric acid
on top of the starter mixture. STEP BACK! The ratios are: 3 parts
iron (III) oxide to 1 part aluminum powder to 1 part potassium
chlorate to 1 part sugar. When you first do it, try 3g:1g:1g:1g!
Also, there is an alternative starter for the Thermite reaction. The
alternative is potassium permanganate + glycerine. Amounts: 55g iron
(III) oxide, 15g aluminum powder, 25g potassium permanganate, 6ml
glycerine.
III. Nitrogen-containing high explosives.
A. Mercury(II) Fulminate
To produce Mercury(II) Fulminate, a very sensitive shock explosive,
one might assume that it could be formed by adding Fulminic acid to
mercury. This is somewhat difficult since Fulminic acid is very
unstable and cannot be purchased. I did some research and figured out
a way to make it without fulminic acid. You add 2 parts nitric acid
to 2 parts alcohol to 1 part mercury. This is theoretical (I have not
yet tried it) so please, if you try this, do it in very small amounts
and tell me the results.
B. Nitrogen Triiodide
Nitrogen Triiodide is a very powerful and very shock sensitive
explosive. Never store it and be careful when you're around it-
sound, air movements, and other tiny things could set it off.
Materials-
2-3g Iodine
15ml concentrated ammonia
8 sheets filter paper
50ml beaker
feather mounted on a two meter pole
ear plugs
tape
spatula
stirring rod
Add 2-3g Iodine to 15ml ammonia in the 50ml beaker. Stir, let stand
for 5 minutes.
DO THE FOLLOWING WITHIN 5 MINUTES!
Retain the solid, decant the liquid (pour off the liquid but keep the
brown solid...). Scape the brown residue of Nitrogen Triiodide onto a
stack of four sheets of filter paper. Divide solid into four parts,
putting each on a separate sheet of dry filter paper. Tape in
position, leave to dry undisturbed for AT LEAST 30 minutes
(preferably longer). To detonate, touch with feather. (WEAR EAR
PLUGS WHEN DETONATING OR COVER EARS- IT IS VERY LOUD!)
C. Cellulose Nitrate (Guncotton)
Commonly known as Smokeless powder, Nitrocellulose is exactly that-
it does not give off smoke when it burns.
Materials-
70ml concentrated sulfuric acid
30ml concentrated nitric acid
5g absorbent cotton
250ml 1M sodium bicarbonate
250ml beaker
ice bath
tongs
paper towels
Place 250ml beaker in the ice bath, add 70ml sulfuric acid, 30 ml
nitric acid. Divide cotton into .7g pieces. With tongs, immerse each
piece in the acid solution for 1 minute. Next, rinse each piece in 3
successive baths of 500ml water. Use fresh water for each piece. Then
immerse in 250ml 1M sodium bicarbonate. If it bubbles, rinse in water
once more until no bubbling occurs. Squeeze dry and spread on paper
towels to dry overnight.
IV. Other stuff
A. Peroxyacetone
Peroxyacetone is extremely flammable and has been reported to be
shock sensitive.
Materials-
4ml Acetone
4ml 30% Hydrogen Peroxide
4 drops concentrated hydrochloric acid
150mm test tube
Add 4ml acetone and 4ml hydrogen peroxide to the test tube. Then add
4 drops concentrated hydrochloric acid. In 10-20 minutes a white
solid should begin to appear. If no change is observed, warm the test
tube in a water bath at 40 celsius. Allow the reaction to continue
for two hours. Swirl the slurry and filter it. Leave out on filter
paper to dry for at least two hours. To ignite, light a candle tied
to a meter stick and light it (while staying at least a meter away).
B. Smoke smoke smoke...
The following reaction should produce a fair amount of smoke. Since
this reaction is not all that dangerous you can use larger amounts if
necessary for larger amounts of smoke.
6g zinc powder
1g sulfur powder
Insert a red hot wire into the pile, step back. A lot of smoke should
be created.
There are many other experiments I could have included, but I will
save them for the next Chemist's Corner article. Upcoming articles
will include Glow-in-the-dark reactions, 'party' reactions, things
you can do with household chemicals, and more...
I would like to give credit to a book by Shakashari entitled
"Chemical Demonstrations" for a few of the precise amounts of
chemicals in some experiments.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
HOME MADE CHEMICAL EXPERIMENTS
This article deals with instructions on how to do some interesting
experiment with common household chemicals. Some may or may not work
depending on the concentration of certain chemicals in different
areas and brands. I would suggest that the person doing these
experiments have some knowledge of chemistry, especially for the more
dangerous experiments.
I am not responsible for any injury or damage caused by people using
this information. It is provided for use by people knowledge in
chemistry who are interested in such experiments and can safely
handle such experiments.
I. A list of household chemicals and their composition
Vinegar: 3-5% acetic acid
Baking soda: sodium bicarbonate
Drain cleaners: sodium hydroxide
Sani-flush: 75% sodium bisulfate
Ammonia water: ammonium hydroxide
Citrus fruit: citric acid
Table salt: sodium chloride
Sugar: sucrose
Milk of Magnesia- magnesium hydroxide
Tincture of iodine- 47% alcohol, 4% iodine
Rubbing alcohol- 70 or 99% (depends on brand) isopropyl alcohol (DO NOT
DRINK!) etc...
[1] Generating chlorine gas
Dangerous! You should know what you're doing before you try this...
Ever wonder why ammonia bottles always say 'DO NOT mix with chlorine
bleach, and vice-versa? That's because if you mix ammonia water with
Ajax or something like it, it will give off chlorine gas. To capture
it, get a large bottle and put Ajax in the bottom. Then pour some
ammonia down into the bottle. Since the chlorine is heavier than air,
it will stay down in there unless you use large amounts of either
Ajax or ammonia (DON'T!). For something fun to do with chlorine stay
tuned....
[2] Chlorine + turpentine
Take a small cloth or rag and soak it in turpentine. Quickly drop it
into the bottle of chlorine. It should give off a lot of black smoke
and probably start burning...
[3] Generating hydrogen gas
To generate hydrogen, all you need is an acid and a metal that will
react with that acid. Try vinegar (acetic acid) with zinc, aluminum,
magnesium, etc. You can collect hydrogen in something if you note
that it is lighter than air... Light a small amount and it burns with
a small *pop*. Another way of creating hydrogen is by the
electrolysis of water. This involves separating water (H2O) into
hydrogen and oxygen by an electric current. To do this, you need a 6-
12 volt battery, two test tubes, a large bowl, two carbon electrodes
(take them out of an unworking 6-12 volt battery), and table salt.
Dissolve the salt in a large bowl full of water. Submerge the two
test tubes in the water and put the electrodes inside them, with the
mouth of the tube a iming down. Connect the battery to some wire
going down to the electrodes. This s will work for a while, but
chlorine will be generated along with the oxygen which will
undoubtedly corrode your copper wires leading to the carbon
electrodes... (the table salt is broken up into chlorine and sodium
ions, the chlorine comes off as a gas with oxygen while sodium reacts
with the water to form sodium hydroxide....). Therefore, if you can
get your hands on some sulfuric acid, use it instead. It will not
affect the reaction other than making the water conduct electricity.
[4] Hydrogen + chlorine
Take the test tube of hydrogen and cover the mouth with your thumb.
Keep it inverted, and bring it near the bottle of chlorine (not one
that has reacted with turpentine). Say "goodbye test tube", and drop
it into the bottle. The hydrogen and chlorine should react and
possibly explode (depending on purity and amount of each gas). An
interesting thing about this is they will not react if it is dark and
no heat or other energy is around. When a light is turned on, enough
energy is present to cause them to react...
[5] Preparation of oxygen
Get some hydrogen peroxide (from a drug store) and manganese dioxide
(from a battery- it's a black powder). Mix the two in a bottle, and
they give off oxygen. If the bottle is stoppered, pressure will build
up and shoot it off. Try lighting a wood splint and sticking it (when
only glowing) into the bottle. The oxygen will make it burst into
flame. Experiment with it. The oxygen will allow things to burn
better...
[6] Alcohol
Buy some rubbing alcohol in a drug store. Usually this is either 70%
or 99% alcohol and burns just great. You can soak a towel in water
and then in alcohol, light the towel, and when it finishes burning
the alcohol, the flame should g o out and leave the towel unharmed.
Nice for "party tricks", etc.
[7] Iodine
Tincture of iodine contains mainly alcohol and a little iodine. To
separate them, put the tincture of iodine in a metal lid to a bottle
and heat it over a candle. Have a stand holding another metal lid
directly over the tincture (about 4-6 inches above it) with ice on
top of it. The alcohol should evaporate, and the iodine should
sublime, but should reform iodine crystals on the cold metal lid
directly above. If this works (I haven't tried), you can use the
iodine along with household ammonia to form Nitrogen Triiodide
(discussed in article #1).
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
CONTACT EXPLOSIVES
PETROLEUM JELLY AND POTASSIUM CHLORATE IN A 1 TO 1 RATIO BY WEIGHT
MAKES A TOTALLY SAFE WHEN WET COMPOUND BUT IS HIGHLY EXPLOSIVE AND
SHOCK SENSITIVE WHEN DRY.
3 GRAMS OF POTASSIUM IODIDE 5 GRAMS OF IODINE IN A BEAKER WITH 50ML
OF WATER MIXED ALL TOGETHER. ADD 20ML OF AMMONIUM HYDROXIDE (AMMONIA
WATER 10%) FILTER AND THE RESULTING SOLID IS CALLED NITROGEN
TRIIODIDE. WHEN WET IS VERY SAFE BUT UPON DRYING BECOMES VERY
EXPLOSIVE AND SHOCK SENSITIVE, TO THE POINT OF A FEATHER SETTING IT
OFF.
TO SET OFF THE ABOVE EXPLOSIVES ALL YOU REALLY NEED TO DO IS PUT SOME
OF THE MIXTURE ON OR IN SOMETHING AND THEN DROP IT SORT OF LIKE AN
IMPACT BOMB. IT EXPLODES ON IMPACT WITH ANOTHER OBJECTS
[-][-][-][-][-][-][-][-][-][-][-][-][-]
HERE IS A MIXTURE FOR GREAT SMOKE BOMBS 4 PARTS OF SUGAR TO 6 PARTS
POTASSIUM NITRATE (SALT PETER). HEAT OVER LOW FLAME UNTIL IT MELTS,
STIR WELL. POUR IT INTO FUTURE CONTAINER. BEFORE IT SOLIDIFIES, IMBED
A FEW MATCHES AS FUSES INTO THE MIXTURE. ONE LB. FILLS A BLOCK
NICELY WITH THICK WHITE SMOKE.
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
ELECTRONIC TERRORISM
It starts when a big, dumb lummox rudely insults you. Being of a
rational, intelligent disposition, you wisely choose to avoid a
(direct) confrontation. But as he laughs in your face, you smile
inwardly---your revenge is already planned.
Step 1: Follow your victim to his locker, car, or house. Once you
have chosen your target site, lay low for a week or more, letting
your anger boil.
Step 2: In the mean time, assemble your versatile terrorist kit
(details below.)
Step 3: Plant your kit at the designated target site on a Monday
morning between the hours of 4:00 AM and 6:00 AM. Include a calm,
suggestive note that quietly hints at the possibility of another
attack. DO NOT WRITE IT BY HAND! An example of an effective note:
"Don't be such a jerk, or the next one will take off your hand.
Have a nice day." Notice how the calm tone instills fear, as if
written by a homicidal psycho.
Step 5: Choose a strategic location overlooking the target site.
Try to position yourself in such a way that you can see his facial
contortions.
Step 6: Sit back and enjoy the fireworks!
Assembly of the versatile, economic, and effective Terrorist Kit #1:
The parts you'll need are:
1) 4 AA Batteries
2) 1 9-Volt Battery
3) 1 SPDT Mini Relay (Radio Shack)
4) 1 Rocket Engine(Smoke Bomb or M-80)
5) 1 Solar Ignitor (any hobby store)
6) 1 9-Volt Battery connector
Step 1: Take the 9-volt battery and wire it through the relay's
coil. This circuit should also include a pair of contacts that when
separated cut off this circuit. These contacts should be held
together by trapping them between the locker,mailbox, or car door.
Once the door is opened, the contacts fall apart and the 9-volt
circuit is broken, allowing the relay to fall to the close position
thus closing the ignition circuit. (If all this is confusing take a
look at the schematic below.)
Step 2: Take the 4 AA batteries and wire them in succession. Wire
the positive terminal of one to the negative terminal of another,
until all four are connected except one positive terminal and one
negative terminal. Even though the four AA batteries only combine to
create 6 volts, the increase in amperage is necessary to activate the
solar ignitor quickly and effectively.
Step 3: Take the battery pack (made in step 2) and wire one end of
it to the relay's single pole and the other end to one prong of the
solar ignitor. Then wire the other prong of the solar ignitor back
to the open position on the relay.
Step 4: Using double sided carpet tape mount the kit in his locker,
mailbox, or car door. And last, insert the solar ignitor into the
rocket engine (smoke bomb or M-80).
Your kit is now complete!
---------><---------
I (CONTACTS) I
I I
I --- (9 VOLT)
I - (BATTERY)
I ---
I I
I (COIL) I
------///////-------
/-----------
/ I
/ I
/ I
(SWITCH) I I
I I
I --- (BATTERY)
I - ( PACK )
I ---
I I
I I
---- -----
I I
*
(SOLAR IGNITOR)
So-o-o-o
You would like to delve into the art of harassing,pestering,annoying
and possibly harming another enemy!!!
Ok-here you'll learn some of the useful methods I've used! For the
squeamish!
ITEM 1-
To torment a person, always start off easy and slowly increase the
severity of your attack until your goal is accomplished! This will
give you an example of r attack letting them know that you're not
done with them yet!
ITEM 2-
To start your revenge, mail anonymous letters and call at all hours!
ITEM 3-
Call the papers-place ads in their name (1964 Chevy Impala-$600)will
get every mexican gang member in L.A. to call and visit their address
if you put it in the ad. Advertise something illegal in their name,
then call the cops and show them!
Call long distance under their phone # and order candy and flowers from
Western Union under their number. Order magazine subscriptions, books
records, everything you!
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
HOW TO MAKE A FLASHLIGHT BOMB
A FLASHLIGHT BOMB IS FAIRLY EASY IT MAKE AND CAN BE CONCEALED SO
WELL, THEY IT IS VIRTUALLY IMPOSSIBLE TO DETECT IT. HERE'S WHAT TO DO:
GET YOURSELF ONE FLASHLIGHT OF ANY SIZE, SHAPE, OR CREED, AND THE
BATTERY/BATTERIES THAT GO ALONG WITH IT. NOW IT IS TIME FOR AN
IMPORTANT DECISION. DEPENDING UPON THE TYPE OF BOMB YOU REQUIRE, YOU
HAVE TO MAKE A CHOICE IN MATERIALS. HERE ARE YOUR CHOICES:
[1] MERCURIC CHLORIDE - GAS BOMB
[2] PURE SODIUM+WATER - FLAME BOMB
[3] SULFURIC NITRATE - ACID BOMB
[4] GUNPOWDER (TNT) - BOOOOOOOOM!
NOW, TAKING THE MATERIAL FOR THE TYPE OF BOMB YOU WOULD LIKE TO MAKE,
PROCEED TO PUT ROCKS, BB'S, GLASS PELLETS, ETC... IN THE BOTTOM OF A
HOLLOWED OUT BATTERY/BATTERIES, UNLESS YOU ARE MAKING A FLAME BOMB,
WHICH IN THAT CASE READ ON. THEN LINE A MAGNESIUM STRIP ALONG THE
SIDE OF THE FLASHLIGHT APPEARING ON TOP OF THE FLASHLIGHT SO YOU MAY
LIGHT IT. NEXT, MAKE SURE YOU HAVE PLENTY OF THE EXPLOSIVE YOU CHOSE
IN THE BATTERY. [ NOT YOU MAY LIGHTLY PACK IT IN, BUT DO NOT HIT
IT!!! MY FRIEND WAS PACKING A HOME-MADE BOMB ONE DAY, AND HAMMERED
THE COVER ON, AND BLEW A HOLE RIGHT THROUGH HIS LIQUOR CABINET ]
NEXT, SECURE THE TOP, LEAVING ROOM TO INSERT THE MAGNESIUM STRIP. IT
SHOULD LOOK LIKE THIS:
-----------
\ /
\ /
\_____/
! BMB !
! BMB !
! BMB !
! BBB !
! !
!_____!
IN THE LAST DIAGRAM, (B) STANDS FOR BATTERY AND (M) FOR MAGNESIUM.
ALSO INSIDE THE BATTERY SHOULD BE THE AMMO AND THE EXPLOSIVE.
NOW FOR THE FLAME BOMB...THE SODIUM, SHOULD BE ON THE TOP, AND THE
WATER IN A BABY FOOD JAR. THE SODIUM USED HERE IS NOT TABLE SALT!!!
YOU WON'T NEED THE MAG. STRIP BECAUSE NUMBER 1, BECAUSE ALL YOU NEED
DO IS HIT THE FLASHLIGHT AGAINST SOMETHING HARD. DO NOT HOLD IT---
THROW IT AS FAR AS YOU CAN!!!
ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃ
EXPLOSIVE PENS
Here are the instructions for building a device no agent should be
without. From the mind of "Q" himself, a device for your evaluation.
Materials......
[1]-(1) "Felt" Tip Pen
[2]-(1) "Ball" Point Pen
[3]-(1) High quality firecracker!
[4]-(1) 8 gram measure potassium parmagranite (optional)
[5]-(x) Scotch Tape
[6]-(1) Large Paper Clip
[7]-(2) Packages of matches
[8]-(1) Pair of scissors
[9]-(1) Length of Beige thread
Assembly......
[1]- Use thread to friction saw the felt tip pen in half at the point
where the cap "snaps" onto the pen. (about mid-section)
[2]- Remove the inert of the felt tip pen, and throw them away.
[3]- Pull the inert out of a bic ball point pen and remove the ball
point assembly at the front of the pen.
[4]- Use scissors to widen the hole in the "felt" end of the pen.
Insert the ball assembly and make sure it is a tight fit. It should
now look as if the felt tip pen was constructed as a ball point pen.
[5]- Cut off abrasive strips from the packs of matches. It is best
if they have not been used. Tape these to the top of the firecracker
near the fuse, the strips should run parallel to the outstretched
fuse.
Wrap fuse over the top of one strip and tape down so fuse runs
parallel to abrasive strips.
[6]- Unbend paper clip and tape a match to the metal rod, the match
should be parallel to the rod and it should be taped tight using as
little tape as possible.
[7]- Insert the match head 1/5 of the way between the abrasive strips
and wrap tape around the assembly. It should now look like this.
------______-----
[][][]a[][][]-----------------(b)
(())---------------------
______------_____ |(c)
|(d)
(a)-Explosive/(b)-Fuse/(c)-Match attached to metal rod/(d)-Abrasives
The entire assembly should be thin enough to slip into the case of
the felt tip pen.
[8]- Using scissors drill a small hole in the "non-tip" end of the
felt tip pen case. Insert the assembly so the metal rod fits through
the hole in the end of the pen case.
[9]- The assembly will not quite fit properly. The firecracker will
protrude from the cut half of the felt tip case. Slip the removed
end of the case over the firecracker. (join the halves together over
the firecracker in the center) and mount the cap of the felt tip pen
on the end of the metal rod. Glue any loose parts. You are done!
To Detonate...
Simply hit the cap (mounted at end of pen permanently) and throw it
at your target, or hand it to your target. My favorite is to say
"Think Fast" and throw them your felt tip pen. (make it a easy throw)
Your victim will catch it, and it will the